在线客服

在线客服

中海油渤中凝析气田开发项目自动反冲洗滤器橇(重新招标)招标公告

A-A+日期:2021-09-15来源:中国海洋石油招标投标网    

 1.中化建国际招标有限责任公司(以下简称“招标机构”)受中海石油(中国)有限公司委托,渤中19-6凝析气田试验区开发项目(第二阶段)的下列全新货物和有关服务进行国际公开招标, 现邀请投标人对下列货物和服务提交密封投标:

货物名称:自动反冲洗滤器橇

项目概况:渤中19-6凝析气田试验区开发项目(第二阶段)计划新建一座天然气增压回注平台渤中19-6BOP平台,新建的BOP平台与已有渤中19-6WHPA平台通过栈桥连接。

主要技术要求:

(1) 设计压力、温度、排量、过滤精度应至少满足:

设计压力: 1000kPaG

温度:50 ℃

排量: 2500m3/h (each)

过滤精度: <180μm

(2) 滤器壳、封头和内件的材质最低要求应满足:

壳: Q345R+Lining Rubber,封头: Q345R+Lining Rubber,内件: S31803

(3) 自动反冲洗滤器具备自动在线反冲洗功能。滤器反冲洗期间,反冲洗水量应小于5%额定流量,压力波动小于10%进口压力。

(4) 滤器内件为过滤柱型式,不接受刮板式机械自清洗型式。

数量:

自动反冲洗滤器橇:1套,橇内包含1台自动反冲洗滤器,单台排量2500m3/h;

海水粗滤器橇:1套,橇内包含1台海水粗滤器,单台排量2500m3/h;

交货期:2022年7月10日(国内)或2022年6月27日(进口)

交货地点:国内:天津塘沽海工建造场地;

国外:中国天津港(进口货物)。

2.业绩和资格要求:

(1)自动反冲洗粗滤器橇需按照《海上固定平台安全规则》的要求进行设计、制造、认证和检验。投标人应委托国家安全生产监督管理总局海洋石油作业安全办公室(COOOSO)认可的船级社(ABS,LIoyd’s,DNV,CCS,BV)对自动反冲洗粗滤器橇设备整体进行检验并获得检验证书。

(2)投标人所投标的自动反冲洗滤器橇应为制造商(成橇商应为自动反冲洗滤器的制造商)的成熟产品,买方不接受新试制产品。该制造商应具有至少1个项目(限2010年1月1日之后签订的合同,相同型式的自动反冲洗滤器,排量≥2000m3/h,设计压力≥1000kPaG)在海上平台或FPSO运行2年及以上(从调试验收报告签字日期或使用方出具的运行时间证明文件起计)的业绩,并提供相应的书面材料(合同及调试验收报告或合同及使用方出具的有效证明文件);上述文件中如未包含设备所在设施的名称及使用方信息,投标人应提供有效说明文件。为核实投标人业绩,在授予合同前招标人有权要求投标人进一步提供相关证明资料,包括但不限于技术协议或技术澄清纪要、图纸和计算书等技术文件、第三方船级社出具证书、发票、银行进账单/流水单、进出口报关单据等。投标人无法提供相关材料的,将视为无效业绩。

3.有兴趣的合格投标人可通过以下方式获取招标文件:

从2021年9月14日至2021年9月24日止,请登录中国海洋石油集团有限公司采办业务管理与交易系统(https://buy.cnooc.com.cn)的招标公告页面进行购买。首次登录必须先进行注册(免费),注册成功后,方可购买招标文件。购买过程必须全程在线操作,线下形式的汇款将不予接受。标书费支付成功后,投标人可自行下载招标文件。售后不退。如未在系统中领购招标文件,不可参加投标。本招标文件每套售价为2000元人民币或300美元,售后不退。

4.投标文件递交截止时间和地点:所有投标文件都应附有按规定提交的投标保证金并于2021年10月11日10:00时(北京时间)前递交至北京市东城区东直门外小街6号海油大厦4层第五会议室,在此时间后收到的投标文件恕不接受。

5.开标时间:定于2021年10月11日10:00时(北京时间)开标。开标地点:北京市东城区东直门外小街6号海油大厦4层第五会议室。

6.  本次招标公告同时在机电产品招标投标电子交易平台(www.chinabidding.com)上发布。 

7. 投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。

招标人:中海石油(中国)有限公司

详细地址:天津市滨海新区海川路2121号海洋石油大厦A座

邮  编:300459

联系人:王喆

联系电话:+86-22-66502503

电子信箱:wangzhe3@cnooc.com.cn

 

招标代理机构:中化建国际招标有限责任公司

详细地址:北京市东城区东直门外小街6号海油大厦4层

邮编:100027

联系人:于娜

联系电话:+86-10-84523443

电子邮箱:yuna5@cnooc.com.cn 

 

Project: BZ19-6 BOP ConDENSATE GAS FIELD PILOT AREA DEVELOPMENT PROJECT

BidNo: 0704-2140JDCP1449/01

Date: SEPTEMBER 14th, 2021

 

1. CNCCCInternational TenderingCo., Ltd.(hereinafter called “TenderingAgent”), for andon behalf of CNOOC China Limited(hereinafter called"Purchaser") invites sealedbids fromeligiblebidders for the supply offollowing equipment:

Name of Goods: AUTO BACKWASH COARSE FILTER SKID

Main Technical requirement:

★  The design pressure, temperature, capacity, filtration precision should meet the following requirements:

Design pressure:1000kPaG

Temperature:50 ℃

Capacity:2500m3/h (each)

Filtration precision: <180μm

★ The minimum requirement of material of shell, heads and internals shall meet the following:

Shell: Q345R+Lining Rubber,Head: Q345R+Lining Rubber,Internals: S31803

★ The auto backwash coarse filter with automatic backwash function online. The flowrate of backwash water should be less than 5% (Flow Rate), the pressure fluctuation of seawater should be less than 10% (Intake Pressure), during backwashing.

★ The auto backwash coarse filter internals’type is filtration column, the scraper mechanical self-cleaning type is unacceptable. 

 

Qty: Auto Backwash Coarse Filter Skid (BOP-X-4001A), 1 Set

    Seawater Coarse Filter Skid(BOP-X-4002), 1 Set

 

Delivery Schedule:

On or before July.10th,2022 (From within P.R.CHINA);

On or before June.27th,2022 (From outside P.R.CHINA).

 

Destination  of delivery:

Construction Site of Tanggu,TIANJIN(From within P.R.CHINA);

Tianjin Seaport(From outside P.R.CHINA).

 

2. Qualification Requirement:

(1) The Auto Backwash Coarse Filter skid shall be designed, manufactured, certified and tested in accordance with the requirements of Safety Rules for Offshore Fixed Platform Issued by State Economic & Trade Commission. PRC (SETC). Supplier shall at his own cost arrange inspection and obtain inspection compliance certificate of the Auto Backwash Coarse Filter skid from one of the certifying agencies authorized by COOOSO, which are ABS, LIoyd’s, DNV,CCS, BV.

(2)The Auto Backwash Coarse Filters Skids that BIDDER supplied should be the manufacturer’s mature products, unused prototype equipment shall not be acceptable. The products(Limited to signing the contract after January 1, 2010, the same type of Auto Backwash Coarse Filter , Capacity ≥ 2000m3/h, Design Pressure ≥ 1000kPaG) provided by Manufacturer shall have at least 1 project of 2 years or more of successful performance (from the date of commissioning acceptance report or the certificate issued by the user) on the Offshore Oil Platform or FPSO. The BIDDER shall provide the relevant supporting documents (contract and commissioning acceptance report or contract and the effective certificate issued by the user). If the name of the facility and the user_EpSingleQuotes_s information are not included in the above documents, the bidder shall provide the valid documentation. In order to verify the performance of BIDDER, the Tenderee shall have the right to request the bidder to provide further relevant supporting information before the contract is awarded. Including but not limited to, technical documents such as technical agreement, technical clarification notes, drawings and calculations etc., certificate approved by the third party classification society, invoice, bank statements/slip, import and export customs declaration etc. If the BIDDER is unable to provide relevant materials, it will be regarded as invalid performance.

3. All those who are willing to participate in the bids are kindly requested to :enter into website http://buy.cnooc.com.cn to purchase the bidding documents (electronic edition) on line from September 14th, 2021 to September 24th, 2021,upon non-refundable payment of RMB2000 or USD300 for each copy. The bidding documents will not be accepted if  these are not purchased online.

 

4.Bids must be delivered to Meeting room 5, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China  for submission of bids before 10:00 a.m. (Beijing time) on October 11th, 2021.

 

5.Bid opening time: the bid will be opened at 10:00 a.m. on October 11th, 2021(Beijing time). Bid opening place: Meeting room 5, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. 

 

6. The Invitation for Bids is issued on the website of www.chinabidding.com simultaneously.

 

7. The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.

 

 

Name of Purchaser:CNOOC CHINA LIMITED

Address: Building A, No.2121,Haichuan Road, Binhai New Area,Tianjin, P.R. China, 300459

Contact Person: Mike Wang

Telephone: +86-22-66502503

E-mail:wangzhe3@cnooc.com.cn

 

Name of Tendering Agent: CNCCC International TenderingCo.,Ltd.

Address:4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China

Contact person:Ms.Yu Na

Telephone:+86-10-84524334

E-mail: yuna5@cnooc.com.cn

 

 

 

更多 >同类资讯

    友情链接

    免责声明:以上展示的产品信息由企业自行提供,其内容的真实性、准确性和合法性均由发布企业负责,中国石油和化工网对此不承担任何保证责任。同时我们郑重提醒各位买家和卖家,

    交易时请认真核实对方身份,切勿随意打款或发货,谨防上当受骗。如发现虚假信息,及时向本网举报。

    京ICP证061057号 京公网安备-110105011209 广告经营许可证:京海工商广字第0394号