玖城牌特高温合成润滑脂
产品型号:SK2401 SK2402 SK2403 SK2 SK3
产品描述:玖城牌特高温合成润滑脂采用无机稠化剂稠化合成油,添加防锈剂、极压添加剂和结构改善剂等精制而成。
产品特点:
优秀的高温耐久性,在高温下具有较长的使用寿命,适合于持续高温作业环境。
具有良好的低温性能,在低温工况下能保持柔软细腻的质地,不会冻结硬化。
良好的极压性能,满足高温环境下中重负荷机械设备的润滑。
优秀的机械安定性、防锈性、抗水淋和保护性能。
产品应用:
用于高温重负荷工况条件下各种滚动轴承的润滑。
用于连轧机及其它高温、重负荷设备的摩擦部位的轴承润滑。
用于烤箱链条,烤漆、喷涂线、干燥箱的高温链条、轴承、齿轮、轨道的润滑与防护。
使用温度:-40℃~600℃
JC Super High Temperature Synthetic Grease
Product number:SK2401 SK2402 SK2403 SK2 SK3
Product description:
JC Super high temperature synthetic grease is manufactured with Inorganic thickener to thickened synthetic oil,and add rust inhibitors, extreme pressure additives, and structural modifiers and so on refined but become.
Performance characteristics:
With excellent high temperature durability, long life at high temperature, suitable for continuous high temperature operating environment.
With good low temperature performance, it can maintain soft and fine texture at low temperature and will not freeze hardening.
With excellent extreme pressure performance, to meet the lubrication of medium and heavy load mechanical equipment in high temperature environment.
With excellent mechanical stability, rust resistance, water resistance and protection.
Recommended use:
Used for lubrication of various rolling bearings under high temperature and heavy load conditions.
Used for lubricate the bearings in the friction parts of continuous rolling mills and other high-temperature and heavy-load equipment.
Used for lubrication and protection of high-temperature chains, bearings, gears and tracks of oven chains, paints, spray lines and drying ovens.
Temperature range:-40℃ to 600℃
玖城牌高温润滑脂的典型数据:Typical data of JC High temperature grease:
项目Project |
典型数据Typical data |
外观 Appearance |
黑色光滑均匀油膏 |
工作锥入度/0.1mm 60次 Penetration 1/10mm 60 times |
220-265 |
滴点,℃ Drop point,℃ |
350 |
铜片腐蚀(T2.100℃.24h) Copper corrosion(T2.100℃.24h) |
合格PASS |
水淋流失量(79℃,1h)% Sprinkling loss(79℃,1h)% |
1.5 |
钢网分油(100℃,24h)% Steel mesh oil filtering(100℃,24h)% |
1.9 |
防腐蚀性(52℃,48h) Corrosion resistance(52℃,48h) |
合格 PASS |
极压性能(四球机法)Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
544 |
蒸发度(120℃,m/m)% Evaporativity(120℃,m/m)% |
≤1.2 |
适用工作温度℃ Applicable working temperature ℃ |
-40--+600 |