玖城牌高速轴承润滑脂
产品型号:ZH1201 ZH1202 ZH1203
产品描述:玖城牌高速轴承润滑脂采用酯类合成油聚脲类化合物为稠化剂,加有多种添加剂精制而成。
产品特点:
优异的抗磨性能和抗水性能,极佳的防锈及防剥落性能。
优良的低噪音性能和高速性能,高清洁度、不含颗粒杂质。
优异的热抗氧化稳定性和防锈防腐蚀能力,极长的轴承寿命。
优异的抗碱能力和耐水性能,提供良好的防锈、抗腐蚀保护。
产品应用:
用于超高速机床主轴、纺织机锭子,滚珠丝杆和高速装置心轴的长寿命润滑。
用于工作于潮湿环境下的轴承的长期润滑,可有效抵御水、酸性以及碱性液体的侵蚀。
用于低温低起动力矩轴承、高速陀螺马达、高速贴片机丝杆及导轨、精密传动齿轮的润滑。
使用温度:-40℃~180℃
JC High Speed Bearing Grease
Product number:ZH1201 ZH1202 ZH1203
Product description:JC High speed bearing grease uses the ester synthetic oil polyurea compounds were used as thickener,add a variety of additives refined.
Performance characteristics:
Excellent abrasion resistance and water resistance, excellent anti-rust and anti-stripping performance;
Excellent low noise and high speed performance, high cleanness and no particle impurities.
Excellent thermal oxidation resistance and rust resistance and corrosion resistance. Very long bearing life.
Excellent anti J alkali capability and water resistance, providing good rust protection and corrosion protection.
Recommended use:
It is used for long life lubrication of spindle of super high speed machine tool, spindle of textile machine, ball screw and high speed device mandrel.
It is used for long term lubrication for bearings in wet environment ,can effectively resist erosion of water, acid and alkaline liquids.
It is used for lubrication of low temperature low starting torque bearing, high speed gyro motor, high speed tape machine screw rod and guide rail and precision transmission gear.
Temperature range:-40℃ to 180℃
玖城牌高速轴承润滑脂的典型数据:Typical data of JC High speed bearing grease:
项目Project |
典型数据Typical data |
工作锥入度/0.1mm 60次 Penetration 1/10mm 60 times |
235--285 |
滴点,℃ Drop point,℃ |
330 |
铜片腐蚀(T2.100℃.24h) Copper corrosion(T2.100℃.24h) |
合格PASS |
水淋流失量(79℃,1h)% Sprinkling loss(79℃,1h)% |
1.2 |
钢网分油(100℃,24h)% Steel mesh oil filtering(100℃,24h)% |
1.6 |
防腐蚀性(52℃,48h) Corrosion resistance(52℃,48h) |
合格 PASS |
极压性能(四球机法)Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
530 |
抗磨性能(四球机法)(40kg,60min)/mm Antiwear performance (4-ball test)(40kg,60min)/mm |
0.41 |
蒸发度(120℃,m/m)% Evaporativity(120℃,m/m)% |
≤1 |
EMCOR防锈实验,10%合成海水 EMCOR antirust experiment, 10% synthetic sea water |
0.0(无锈) (No rust) |